1.POWER IN
The unit requires an adaptor that delivers 9V regulated DC with minimum 300mA. plug tip negative.
2. LEVEL KNOB
Controls the level of the distorted signal.
3. SCOOP KNOB
Controls the middle frequency. Turn it clockwise to increase the middle frequency;turn it counterclockwise to reduce the middle frequency.
4. GAIN KNOB
Adjust the amount of distortion Turning clockwise increases the amount of distortion and sustain.
5. TONE KNOB
Controls the high frequency. Turn it clockwise to get a brighter sound;turn it counterclockwise to get a smooth
and mellow sound.
6. OUTPUT
Connects the OUTPUT of the pedal to your guitar amplifier or to the Input of another effects unit.
7. INPUT
Receives the jack of the cable coming from the guitar or from the output of another effects pedal.(1/4-inch mono phone plug). Plugging a jack into this INPUT switches the power ON. Pulling the jack out switches the power OFF.
8. LED Indicator
Lights up when the pedal is active.
9. ON/OFF Switch
This foot switch turns the effect ON or OFF.
Overview
*Fully ANALOG circuit(3 gain stages).
*True bypass hardware switching.
*Aggressive high gain distortion sounds possible.
*FETs simulate the characteristic distortion of tube amplifiers.
*Active mid frequency EQ circuitry.
*LED indicator shows status of effect and battery condition.
*The pedal can be powered by battery or an optional AC adapter.
SPECIFICATIONS
*Input impedance: 1M Ohms.
*Output impedance: 10K Ohms.
*Power: 9V battery or external AC adaptor delivering 9V DC regulated minimum 300mA.
*Dimensions:121(L)*77(W)*48(D)mm.
*Weight: 230g.
0 comments:
Post a Comment